Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift

Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift
Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift
Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift
Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift
Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift
Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift
Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift
Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift
Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift
Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift
Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift
Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift

Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift

Liftmaster ATL Lane Bike Vehicle MOT Class 1 2 4 5 7 Brake Tester Elite 4 Gas Analyser Ramp. In good condition and in full working order.

Supplied New In August 2018 had minimal use before the MOT center closed. 1st photo is of the equipment installed in the garage immediately before we removed it. Please note the item is for supply of the equipment only, we do not offer fitting. 7ATLES55AB/GATLSL546A Wheel Alignment ATL 5000 kg Nussbaum UNI LIFT 5000 NT AMS Hydraulic Scissor Lift & Lighting. 1 x Liftmaster LGATLBT7 4000 Kg ATT Arena TL720 Class VII I & II Brackets ATL Brake Tester, Wireless remote, Wireless Keyboard.

1 x Liftmaster MPJ2.8DE Air Operated 2800 Kg Capacity Jacking Beam. 1 x Liftmaster LMHBA1 Headlight Beam Tester 5.6m Floor Rails. 1 x Liftmaster MOT Tool Board. 1 x Premier Diagnostics Wall Mounted Compact Elite Micro DS2 Smokehead 4 Gas Diesel Emissions MOT Analyser - VI 2018 11.21/11.2/4.3.

Liftmaster 7ATLES55AB/GATLSL546A Wheel Alignment ATL 5000 kg Nussbaum UNI LIFT 5000 NT AMS Hydraulic Scissor Lift & Lighting. The hydraulic scissor lift Uni Lift 5000 NT AMS Unterflur with a lifting capacity of 5000 kg is the perfect lift for wheel alignment, testing, check-in inspection, diagnosis and repairs in the automotive workshop. With the fast lifting and lowering times, their small space requirement thanks to the low rails and the short ramps, their comfortable Lifting height of 1970 mm, the flexible installation width and the variable distance between the operating unit and the lifting platform, the Uni Lift 5000 NT AMS Unterflur the perfect companion for every car repair shop that needs a lift that meets all requirements. The wheel alignment set integrated into the rails of the lifting platform for precise wheel alignment consists of a sliding plate at the rear of the rails and recesses for turntables in the front. The mechanical safety ratchet attached to the scissors guarantees perfect stability during wheel alignment.

All Nussbaum hydraulic scissor lifts are equipped with two redundant hydraulic circuits as standard: Nussbaum-s patented hydraulic technology NT. The NT technology controls the perfect synchronisation of the four cylinders of the NT system, which are driven in two independent, redundant hydraulic circuits by a powerful and low-noise suboil motor. The control unit of the Uni Lift 5000 NT AMS Unterflur is equipped with a main switch and protected pushbuttons and can be positioned at various distances from the lift. The Uni Lift 5000 NT AMS Unterflur has no fixed connections between the platforms and can therefore be installed in different installation widths as required. The low power consumption and low maintenance requirements, also thanks to the reduced number of moving parts, reduce running costs.

The scissors and platforms are welded in Nussbaum's own state-of-the-art welding machines, shot-peened and then powder-coated azul Your lift is thus protected against dirt and weather in the long term. No cross rails or torsion bars between lifting platforms (for maximum accessibility in the working area).

VOSA approved wheel play detectors. CE approved lift with low voltage controls. Audible alarm during the final lowering phase. All pivot points made with self lubricating bushings for long life. Recessed platforms for flush fit ball race turning plates. Integrated wheel alignment set with sliding plates and recesses for turntables. Mechanical lock guarantees perfect stability for testing. Space-saving: Low rails and short drive-on ramps.

Flexible installation width, Distance between control unit and lift can be varied as required. Lifting time: 35 Seconds / lowering time29 Seconds.

Lifting height of 1970 mm. 3 Ph , 400 V , 50 Hz.

Liftmaster LGATLBT7 4000 Kg ATT Arena TL720 Class VII I & II Brackets ATL Brake Tester, Wireless remote, Wireless Keyboard. Suitable for ATL MOT Testing.

Test axles up to 4000 Kg. Brake test results can be saved to the PC hard drive and retrieved at any time. Wall mounted or floor standing cabinet houses the PC & keyboard. Fully approved by the Driver & Vehicle Standards Agency (DVSA). Clear graphics provide easy step by step instructions.

Motorcycle adaptor plate to allow Class I & II testing. Cover plates plates-LMBT-CP4 / LMBT -CP7.

Test Speed (kph) & Motors (kn). Max Speed Force per Wheel (kgf).

Width of Axle Tested (mm). Liftmaster MPJ2.8DE Air Operated 2800 Kg Capacity Jacking Beam. Due to recent advances by vehicle manufacturers, the design of cars has become lower and wider, with longer suspension travel. All of these changes have impacted on lifting equipment specifications, especially those of jacking beams. Top Beam Extra-wide extending top beam to 1755mm. Ram and Scissors - a full 205mm (8) lift with proven hydraulics, robust and very reliable. Safety Features - Hose burst valve, pressure release valve prevents overloading, finger guard complies with European machinery directive and CE marking. Quietest Ever Pump - The new quieter design of pump, built into every jack significantly enhances performance and reduces noise as well as further improving operational reliability. Two-Position Mechanical Lock - Engages automatically creating safe working platform when carrying out extensive wheel overhauls. Raiser Blocks - Supplied as standard with each beam.

Rubber-topped screw pad 1532A and aluminium block 1526 that will fit anywhere over the length of the beam. Additional blocks can be supplied as optional extras. Support Arms - Easy roll operation from quality roller bearings minimum effort, easy movement. Roller Hook or Roller Flat Support Arms Supplied As Standard.

A Width when extended (mm). Minimum width over support arms (mm).

Maximum width over support arms (mm). Weight-with top beam (kg) 113. Liftmaster LMHBA1 Headlight Beam Tester 5.6m Floor Rails. DVSA approved headlight beam tester with analogical luxmeter, mirror visor.

H base with double rail and rotating column. The headlight tester is manufactured to inspect and adjust any type of vehicle or motorcycle headlights of the filament , halogen or xenon types. It is a robust aligner for daily use in the workshop, enabling easy alignment with a mirror so that the measuring image can be seen from the rear.

An automatic lock enables the height adjustment to be secured. No batteries or power connections are needed with this unit as readings are able to be made using the light from the beams. The unit is available in different versions as a mobile unit or on rails or with a luxmeter or without. Length of floor rails (m). Premier Diagnostics Wall Mounted Compact Elite Micro DS2 Smokehead 4 Gas Diesel Emissions MOT Analyser.

Combi Petrol and Diesel Emission Analyser includes the latest Cable-less Diesel DS2 Smokehead and the PDCom EOBD new technology sensing module for RPM and Oil Temperature measurement. Accredited to latest Euro 6 standards. Ideal for checking vehicles compliant for low emission zones. Designed for global PTI/ATF/MOT emission. Fully compliant with UK & EU Roadworthiness Directive 2014/45/EU.

DVSA approved to Class 4, 5, 7. HGV, PSV, RPC, SVA & LFZ. Colour monitor and a solid-state Pc (offering the flexibility to run your own programmes). The Diesel DS2 Smokehead incorporates automatic calibration with every test.

No more filters to lose or break. Automatic gas bench self-draining system. The Diesel DS2 Smokehead will operate down to -lSC and in all weathers with 100 metres range from its Workstation.

Designed to complement the modern MOT test station for now and the future. VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered. SL 225375 - Headlamp Aligner.

SL 225376 - Pallet ramp parts/ Jack / MOT board. SL 225377 - Ramp beds. SL 225378 - Ramp beds. SL 225379 - Ramp controller.

SL 225380 - Rolling road controller and parts. SL 225381 - Rolling road unit. SL 225382 - Headlmap beam floor rails.

SL 225383 - Gas Tester. SL 225384 - Base Plate. SL 225385 - Base Plate. The item "Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift" is in sale since Friday, September 13, 2019. This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Other Garage Equipment & Tools".

The seller is "saveonkit" and is located in London. This item can be shipped to United Kingdom.


Liftmaster 5 Ton ATL Lane Bike MOT Class 1 2 4 5 7 Brake Tester 4 Gas Ramp Lift


Homepage    Map    Contact Form    Privacy Policy Agreement    Terms of Use